With the support of efficient professionals, we manufacture Portable Hardness Tester, which is used to determine the mechanical strength of objects. Our portable testing devices are appreciated worldwide for the known properties like light weight, easy to handle, smooth performance and low maintenance cost. The device is offered in slim size briefcase for easy handling. Moreover, our slim structured tester is also applied to measure the variation in hardness of different plant machineries.
|Minimum Order Quantity||1 Piece|
|Test Range||0 ~ 20 HW (equivalent to 20 ~ 110 HRE, Model W-20)|
|Repeatability||0.5 HW (5 ~17 HW)|
|Resolution||0.5 HW (5 ~ 17 HW)|
Dynamic Hardness Tester Application
In stores for material identification.
Measurement of Hardness in confined spaces.
Variation in hardness over large work piece.
Large & heavy components.
Permanently installed parts.
Surface hardened component or hardness on coatings.
Sleek and handy design comes in a slim briefcase, for carrying the machine.
Alpha numeric display which indicates selected material & scale combination & hardness valve.
Average key to select average of 2 to 10 readings.
Machine is having improved electronics with micro controller circuitry & user friendly software.
30 hardness scales for different probes selectable by feather touch keys (Pls. ref. the table).
Auto detection of probe facility is given.
Automatic shut down facility is provided when machine is not in use for continuously 10 minutes.
This model operates on 2 numbers of pencil cells.
Printing is possible with all types of ports i.e. Dot matrix (Centronic parallel port).
Up to 999 readings can be stored in memory of the machine for printing purpose (This Facility is useful when operating the machine at site).
Low test expenditure.
Five numbers of probes can be given in different combination. For eg. * D1, D2, G1, G2 & C * D1, D2, D3, D4 & D5 * D1, D2, G1, SH & C
Conversion of UTS facility is available on display by using side keys(←). This is applicable for only BHN scale for the range 226 to 634 BHN (hard steel & hard alloys only).
Display last result (For eg. From Sr. No. 20 onward) facility is given by using upper arrow key (↑) & down arrow key (↓). Also we can scroll through stored readings.
The ON/Off switch is provided with feather touch keyboard on front side.
In this model both serial & printer interfaces are available on single port (serial interface is an extra accessory).
Automatic calibration facility of probe is available through keyboard.
Serial interface is possible with Rs. 232.
Date entry & date wise printout facility is available.
We can recall the readings one by one by using arrow key (↑) (↓) on display, in display result mode.
Backlight ON/ OFF facility is given by using arrow key (↑) (→) through keyboard.
|Weight (kg)||1.75 kg Approx|
|Maximum Test Height||110 mm|
|Throat Capacity||55 mm|
Our clients can avail from us an entire quality assured range of Portable Hardness Tester that find wide applications in test parts where bench type hardness tester model is not useful. Light in weight, these hardness testing machines are used for product testing of crank shafts, cylinder blocks, liner and assemblies and are also handy for inside and outside of surface testing of pipes, bushings, ball bearing rings or other complicated parts. Used in any direction without affecting the accuracy, these testing machines exhibit various salient features. One of the features includes a maximum test height x throat capacity of 110 x 55 mm. Its Rockwell hardness scales such as HRA, HRB and HRC are obtained by using different types of indentors namely Diamond or Ball. It conforms to IS: 1586-2000 for Rockwell test as per international standards.