We are among the noted manufacturers and exporters of Vickers Hardness Testing Machine. These are computer operated system to test the Vickers hardness of metals. Standard accessories used in this testing system are Vickers Diamond Indentor, Vickers Standard Test Block, Load Frame and AC cord. Our comprehensive array includes Computerized Vickers Hardness Tester and Vickers Cum Brinell Hardness Testing Machine. These devices are appreciated for the features like high energy efficiency and precise measurements.
BIE Make Vickers as well as Vickers cum Brinell Hardness Testers Models: BV-50, BV-50-S, BV-120, BV-120-S are suitable for Vickers and Brinell Hardness of Steel and other metals. These machines are designed and manufactures for very high accuracy, reliability and ease of operation.
The selection of load is effected with the push button control system. The measurement of diagonal/ diameter of indentation is done with the help o built-in optical system with graduated readout with Micrometer. After taking indentation on the work piece, the objective lens is automatically swiveled into position and image of indentation appears on the focusing screen fitted in front of the machine. A push button is provided for starting the loading cycle and unloading is accomplished though hand lever. This machine conforms to IS: 1754-1986 for Vickers and IS: 2281-1983, BS: 240 for Brinell Test.
Vickers Hardness Testing Machine:
BV-50 : Only for Vickers test load range 5 Kgf to 50 kgf
BV-50-S : Only for Vickers test load range 1 Kgf to 50 kgf
BV-120 : Only for Vickers test load range 5 Kgf to 120 kgf
BV-120-S : Only for Vickers test load range 1 Kgf to 120 kgf
Vickers Cum Brinell Hardness Testing Machine:
BV-250 : For Vickers and Brinell Test load range 5 Kgf to 250 kgf
BV-250-S : For Vickers and Brinell Test load range 1 Kgf to 250 kgf
Item Code: HT-1000
Digital & Computerized Micro Vickers Hardness Tester :
HT-1000 Micro Vickers Hardness Tester adopts large LCD Screen to display. By mean of control keys, HV or HK hardness scales, testing force and duration time can be selected and brighness of light source can be adjusted. The hardness value is displayed directly by entering the indentation diagonal length and avoid the complication of the look-up table. Machine can be connected with computer, use the image analysis software to anlayzing the physical and chemical properties of the material.
Usage Range :
Heat treatment layer, carbonized layer, hardened hard layers, superficial
Coating, steels, non-ferrous metal, micro and thin shaped components.
Item Code: FMV1Micro Vickers Hardness Tester machine (Model: FMV-1)
Suitable for finish components like thin sheets, fine wires, etc. Watch parts like springs, pivot bearings, gears, cutting edge of Razor blades, drills, file teeth, etc. Metallic foils, surgical needles, pen points & so on.
To determine hardness on - surface coatings (like electroplating, etc.), extremely thin case hardened parts, anodized castings of aluminium, shot blasted or rolled faces, etc.
A range of test loads can be used to suit particular application. Test loads from 10 grams to 1000 grams.
Magnifications - 125X, 250X & 625X available.
X-Y stage is provided with least count of 0.01mm, which can move the job as per the requirements.
A precision Diamond Indentor (136° pyramid) is used to make sharp indentations on the specimens / samples.
Maximum Test height x Throat : 115 x 70 mm.
Load accuracy well within ± 1% of nominal load value. Machine conforms to IS:1754
Computerized model is available .Computerized model has built in CCD and suitable advanced software. Hardness will be displayed on computer monitor automatically. Results printout can be taken.
Extra (Optional) accessories like – Knoop Indentor, Knoop test block, Precision vice, Thin specimen holding device, V-shape anvil, Vertical & Horizontal fine specimen holding device, Rotary table, etc. are available.