We are offering our clients with Pendulum Impact Testing Machines that works on pendulum principle and are highly suitable for conducting Charpy & Izod Impact tests on various material. Minimum energy absorption is assured due to rigid designs of machine frame & other parts during fracture that results in improved test accuracies. Highly stressed parts such as support blocks & strikers are manufactured using special alloy steels that are duly heat-treated.

Features:

• Direct indication of impact energy absorbed by specimen on large diameter for Models: AIT-300-N, AIT-300-EN & on digital panel display for Model: AIT-300-D

• Available with safety guard for the operator

• Initial potential energy for Charpy is 300 Joules & for Izod is 170 Joules with a L.C. of 2 Joules (for Analogue models) & resolution of 0.5 Joules (for Digital Model)

• Pendulum drop angle for Charpy is 140° & for Izod is 90°

• ASTM Impact Testing machine is also supplied, which conforms to E-23 ASTM standard

• Available with Gauges, Tongs, Sub-zero bath, Templates, U & V Notch milling cutter (Optional)

• Accuracy of these machines conforms to IS: 3766-2003, IS:1598-1977, IS:1757-1999, IS:1499- 2003, BS:131-Part-I, II, III, IV & BS EN-10045-1993 (for Charpy)

• Machines are designed to test chains, wire ropes & any long specimens for proof test or destructive tensile test.
• High loading accuracy & infinitely variable straining speeds to suit a wide range of materials.
• Continuous roll autographic recorder to get load - elongation graph.
• Robust loading frame, Simple controls & easy to operate.
• Adequate safety devices for safe operation.
• Analogue models with large dial & load measurement by pendulum dynamometer principle.
• Digital / Computerized models are also available where load Vs elongation is in digital display & printout of results can be Horizontal Chain & Wire Rope Testing Machines (Model : FCR, FCR-E / FCR-EC)

• Suitable for testing a wide range of materials.
• Wide range of standard & special (Optional) Accessories such as - Load-Stabilizer, Attachments for Brinell test, etc. are available.
• Various Models - Maximum Capacity from 100 kN to 3000 kN.
• Loading accuracy well within ±1%, conforms to IS:1828 / BS:1610.
• Analogue, Digital & Computerized versions are available.

Techinical Specification is as per PDF attached.

• Suitable for testing a wide range of materials.
• Wide range of standard & special (Optional) Accessories such as - Load-Stabilizer, Attachments for Brinell test, etc. are available.
• Various Models - Maximum Capacity from 100 kN to 3000 kN.
• Loading accuracy well within ±1%, conforms to IS:1828 / BS:1610.
• Analogue, Digital & Computerized versions are available.
Techinical Specification is as per PDF attached.

Our company is one of the prominent manufacturers and exporters of Coil Spring Testing Machine. Designed for exact results, our testing equipment are widely used in the research institutes and laboratories. Measuring device of this unit is mounted on the metal table.  Chief components used in this testing system are rotary encoder, LCD display on DAS Panel for load and displacement, tension shackles and Compression cells. We manufacture our spring testing systems in diversified range from 100 N to 2000 N. Moreover, our all spring testing systems are designed as per the IS: 1828 and BS: 1610 quality guidelines.

Key specifications:

• Digital and manual operation
• Load measurement with the help of 2-3 load cells attached in the machine. Additional load cells can be provided into the system at nominal cost
• Standard load resolution is upto 10,000 counts. Higher resolution with enhanced capacity up to 20,000 load counts can be provided at additional cost
• Load measurement accuracy ranges from -1 to +1

• The machine is used to test wide range of Leaf / Laminated Springs for load rate as per IS:1135-1984.
• Measuring ranges available with auto load selection facility.
• Large size table for wide range of springs with motorized rapid adjustment of test height.
• Standard autographic recorder.
• Over load & Over travel safety provisions.
• Facility of Compression, Shear, Brinell & Bending test with extra accessories.
• Load stabilizer (Optional) is an extra attachment used to maintain a desired load constant at specific deflection enabling measuring it easily & accurately.
• We can also supply machines for Helical compression springs & Disc springs.
• Various Models - Maximum Capacity from 100 kN to 500 kN.
• Loading accuracy well within ±1%, conforms to IS:1828 / BS:1610.
• Analogue, Digital & Computerized versions are available.

Techinical Specification  is as per PDF Attached