We provide our clients with Vickers cum Brinell hardness testing machines that are available in various models such as BV-250, BV-250-S, BV-120, BV -120 -S, BV -50, BV -50-S. Suitable for Vickers and Brinell Hardness of steel and other metals, these machines are well known for high accuracy, reliability and easy operation. Our machines conforms to IS 1754 -2002 standards for Vickers and IS 2281 -2005, BS-240 standards for Brinell Test.

Vickers Hardness Testing Machines are available in following models:

• BV-50: Only for Vickers test load range of 5kg to 50 kg

• BV-5O-S: Only for Vickers test load range of 1kg to 50 kg

• BV-120: Only for Vickers test load range of 5kg to 120 kg

• BV-120-S: Only for Vickers test load range of 1 kg to 120 kg

Vickers cum Brinell hardness Testing Machines are available in following models:

• BV -250: For Vickers and Brinell Test load range of 5 kg to 250 kg

• BV -250-S : For Vickers and Brinell Test load range of 1 kg to 250 kg

Features:

• Wide testing range from soft metal such as lead to the hard metal such hardened steel

• Thin sheet metal is perfectly tested because the load applied is very small

• Same hardness number is obtained on the some specimen, regardless of the load applied

• Built in projection screen to get accurate results

Technical data and standard accessories detail are in following attachment:

We provide our clients with Computerized Vickers Hardness Testing Machines that are fully computer operated and facilitate with accurate measurement of Vickers hardness. These machines can are used for testing load of various metals ranging from soft to the hardest and are available with manual as well as automatic modes of measurement.

Features:

• Fully computerized system for indentation, measurement and display

• Accurate measurement of Vickers hardness through matched optics, CCD, hardware and software using advanced image processing technology

• Wide range of 10 steps of test loads for testing soft metals such as lead to hardest steels

• High accuracy confirming to IS 1754-1986

• Push button provided for load selection

• Loading by push button operation

• Software based on Windows operating system

• Two modes of measurement - automatic & manual

• In automatic mode the image is scanned for measurement and hardness is displayed automatically

• In manual mode, user has to select the 4 corners of the indentation to evaluate the hardness value. Only on confirmation by the user, the hardness value is stored

• Zooming, planning and scrolling facilities are available to enhance measurement accuracy in manual mode

Technical Specification:

• Test loads (kgf): 5, 10, 15, 20, 30, 40, 50, 60, 100 &120

• Objective magnification: 4 X or 8 X

• Resolution (mm): 0.002/0.001

• Maximum Test Height (mm): 225

• Throat Depth (mm): 150

• Weight (Approx) kg: 160

• Load Frame Size (L x W x H mm) Approx: 660 x 320 x 990

• Power Supply: 220 V, AC, 50 Hz, 1 Phase

• Measurement Range: 1 - 1000 Micron

Standard Accessories:

• Flat table of 100 mm diameter

• “V’ table for specimen 6 to 8mm diameter

• Vickers Diamond Indentor

• Vickers Standard Test Block

• Electric Cord

• Instruction Manual